View B39202B8618P810_9075493.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer lte band ii (pcs) series/type: ordering code: b8618 B39202B8618P810 date: version: january 22, 2015 2.0 ? epcos ag 201 5 . reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited. epcos ag is a tdk group company.
2 january 22, 2015 b8618 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephonelte band ii (pcs) systems n low insertion attenuation n low amplitude ripple n usable passband 60 mhz n single ended to balanced transformation in antenna - rx path n impedance transformation 50 to 100 in antenna - rx path features n package size 1.8 x 1.4 mm 2 , max. height 0.5 mm n rohs compatible n approx. weight 0.0035 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitive l evel 3 ( msl ) bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 1 2 3 6 5 7 5 6 1 2 3 7 0.5 max. 0.7 0.5 max pin configuration n 1, 8 rx output, balanced n 3 tx input, single ended n 6 antenna n 2, 4, 5, 7 ground
3 january 22, 2015 b8618 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = ?0 ?c to +85 ?c tx terminating impedance: z tx = 50 ant terminating impedance: z ant = 50 rx terminating impedance: z rx = 100 || 9.5 nh (differential mode) rx terminating impedance: z rx = 25 (common mode) b8618 1) 1) specified min./max. values are valid for a testing power of +10 dbm. characteristics tx - ant min. typ. @ 25?c max. center frequency f c 1880 mhz maximum insertion attenuation 1850.24 ...1909.76 mhz 1.9 2.5 db amplitude variation (over any 5 mhz) 1850.24 ...1909.76 mhz 0.3 1.5 db error vector magnitude @f carrier 1852.4 ...1907.6 mhz evm 2) 2) error vector magnitude (based on definition given in 3gpp ts 25.141) of a 3.84 mcps wcdma signal. 0.5 3.0 % input vswr (tx port) 1850.24 ...1909.76 mhz 1.4 2.0 output vswr (ant port) 1850.24 ...1909.76 mhz 1.4 2.0 attenuation 50.0 ... 787.0 mhz 30 42 db 728.0 ... 764.0 mhz 40 43 db 869.0 ... 894.0 mhz 40 43 db 1226.0 ... 1250.0 mhz 43 50 db 1559.0 ... 1606.0 mhz 43 54 db 1605.9 ... 1680.0 mhz 30 54 db 1930.24 ...1989.76 mhz 44 57 db 2010.0 ... 2025.0 mhz 20 52 db 2110.0 ... 2155.0 mhz 44 49 db 2400.0 ... 2500.0 mhz 25 35 db 3700.0 ... 3820.0 mhz 26 29 db 4900.0 ... 5950.0 mhz 21 29 db 5550.0 ... 5730.0 mhz 23 27 db
4 january 22, 2015 b8618 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = ?0 ?c to +85 ?c tx terminating impedance: z tx = 50 ant terminating impedance: z ant = 50 rx terminating impedance: z rx = 100 || 9.5 nh (differential mode) rx terminating impedance: z rx = 25 (common mode) b8618 1) 1) specified min./max. values are valid for a testing power of +10 dbm. characteristics ant - rx min. typ. @ 25?c max. center frequency f c 1960 mhz maximum insertion attenuation 1930.24 ...1989.76 mhz 2.7 3.5 db input vswr (ant port) 1930.24 ...1989.76 mhz 1.6 2.0 output vswr (rx port) 1930.24 ...1989.76 mhz 1.6 2.0 attenuation 50.0 ... 1850.0 mhz 45 49 db 80.0 mhz 50 >60 db 1850.24 ...1909.76 mhz 45 52 db 2050.0 ... 2075.0 mhz 25 39 db 2075.0 ... 2350.0 mhz 30 37 db 2350.0 ... 2550.0 mhz 20 31 db 2550.0 ... 6000.0 mhz 40 51 db 5610.0 ... 5845.0 mhz 48 52 db
5 january 22, 2015 b8618 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = ?0 ?c to +85 ?c tx terminating impedance: z tx = 50 ant terminating impedance: z ant = 50 rx terminating impedance: z rx = 100 || 9.5 nh (differential mode) rx terminating impedance: z rx = 25 (common mode) b8618 1) 1) specified min./max. values are valid for a testing power of +10 dbm. characteristics ant - rx min. typ. @ 25?c max. differential mode isolation 1574.0 ... 1577.0 mhz 40 67 db 1850.24 ...1909.76 mhz 54 57 db 1930.24 ...1989.76 mhz 55 61 db 3700.0 ... 3820.0 mhz 20 58 db 5550.0 ... 5850.0 mhz 20 49 db common mode isolation 1850.24 ... 1909.76 mhz 43 48 db
6 january 22, 2015 b8618 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet maximum ratings operable temperature range t ?0/+90 ?c storage temperature range t stg ?0/+90 ?c dc voltage v dc 0 v esd voltage v esd 300 1) 1) target, acc. to jesd22-a114f (human body model), 1 negative & 1 positive pulses. v human body model, 1 pulse esd voltage v esd 600 2) 2) target, acc. to jesd22-c101c (charge device model), 3 negative & 3 positive pulses. v charged device model, 3 pulses input power at p in source and load impedance 50 1850.24 ... 1909.76 mhz elsewhere 2910 dbmdbm continuous wave t = 50?c, >5.000 h }
7 january 22, 2015 b8618 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx - ant (passband)frequency response tx - ant
8 january 22, 2015 b8618 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx - ant (wideband)frequency response ant - rx (passband)
9 january 22, 2015 b8618 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response ant - rxfrequency response ant - rx (wideband)
10 january 22, 2015 b8618 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx - rx differential mode isolation
11 january 22, 2015 b8618 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. vswr s 11 tx-port vswr s 33 rx-port vswr s 22 ant-port
12 january 22, 2015 b8618 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8618 ordering code b39202-b8618-p810 marking and package c61157-a8-a87 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8618_nb_un.s3p (unmatched, narrow band)b8618_wb_un.s3p (unmatched, wide band) see file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of cer- tain hazardous substances in electrical and electronic equip- ment ("directive") with due regard to the application of exemp- tions as per annex iii of the directive in certain cases. for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos agsystems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
13 january 22, 2015 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specication is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?d. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci? notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales ofces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specications. please check therefore to what extent product descriptions and specications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specic products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?eneral terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specication is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?d. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci? notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales ofces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specications. please check therefore to what extent product descriptions and specications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specic products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?eneral terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39202B8618P810

	To Download B39202B8618P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .